User`s guide

4–Data Migration Licenses
Applying an Array-based License to a Specific Array
ISR654606-00 A 4-5
All attribute values that have been changed will now be saved
MPX200 (miguser) #> show features
Feature Key Information
-------------------------
Key 100000-LCMDSNDCESR3X-B751BF30-DM-2TB
Date Applied Fri Aug 22 21:59:58 2009
Key 200000-LCKROB9C6AKYA-B751BE8E-DM-5TB
Date Applied Wed Sep 17 10:05:09 2009
Key 100000-LCIGAALUMFE2S-B751BF0B-DM-2TB
Date Applied Wed Oct 8 09:54:28 2009
MPX200 (miguser) #>
Applying an Array-based License to a Specific
Array
You can apply an array-based license to a specified storage array using either the
HP StorageWorks mpx Manager GUI or the CLI. This section provides
instructions for both methods.
Applying an Array-based License to a Specific Array in the
GUI
If you have purchased array-based licenses and installed the licenses in the
MPX200, follow these steps to license a specific array for data migration. For
every array that is licensed, one license is consumed.
To apply an array-based license to a specific array in the GUI:
1. In the left pane of the HP StorageWorks mpx Manager main window, click
the mpx Manager tab.
2. On the Wizards menu, click License an Array.
3. In the left pane under FC Arrays, click the name of the array for which you
want to apply the license.
4. In the License Array dialog box (Figure 4-4), select the array for which you
want to apply the license, and then click OK.