User`s guide

3–Using DMS
Using the Verify Migration Job Wizard
ISR654606-00 A 3-35
 Click Schedule for Later, and then enter a Start Time and Start
Date.
 Click Serial Schedule Jobs, and then assign a priority (1–256)
in the Job Priority box, where a lower value indicates that the
job is scheduled earlier than jobs configured with higher values.
For details on Serial Schedule Jobs, see “Starting Serial
Scheduled Jobs” on page 3-18.
 Click Configure Only to configure the migration job without any
start time or priority. You may start this job at a later time. (To
start the job, select it and then click Start, or from the active job
pane, right-click the job and then click Start.)
b. In the Group Name box, select a job group name from the list. The
group name makes it easier to view the job status on a group basis.
c. In the IO Size box, either select one of the default I/O sizes, or enter a
custom value.
Figure 3-15 Verifying Jobs Options Dialog Box
d. To save the verifying jobs options, click Apply. Or, to abandon
changes to this job verification, click Cancel.
5. Add the source and destination LUN. For details, see “Using the Data
Migration Wizard” on page 3-7.