User`s guide

3–Using DMS
Setting Array Properties
ISR654606-00 A 3-3
Figure 3-1 Setting Array Properties: Target Type
5. To save your changes, click Save.
6. In the Security Check dialog box, enter the administrative password. (The
default password is migration.)
The mpx Manager displays an informative message indicating that the array
properties have changed.
7. Click OK to close the message box.
8. To apply the changes and update the window before changing other array
properties, click Refresh.
Setting the Array Bandwidth
After you have changed the Target Type to Source, saved your changes, and
refreshed the mpx Manager (see “Setting Array Properties in the GUI” on
page 3-2), the right pane for the array shows an additional property, Array
Bandwidth. Follow the procedure in this section to change the array’s bandwidth
setting for data transfers.