User`s guide

5–Command Line Interface
show compare_luns
ISR654606-00 A 5-61
show compare_luns
Summarizes the status of verify jobs either with a specific state or all jobs. It also
lists the configuration details of the selected job.
Session miguser
Example The following shows an example of the show compare_luns command.
MPX200 <1> (miguser) #> show compare_luns
Compare State Type ( 1=Running 2=Failed 3=Completed 4=All ) : 4
Job Owner Type Status Job Description
ID
--- ----- ---- ---------------- ----------------------
0 1 Offline Serial Scheduled CX-320-A:VPG1:000 to MSA-2012..
Please select a Compare Job Id from the list above ('q' to quit): 0
Compare Information
-------------------
Job Id 0
Job Owner b1
Job Description CX-320-A:VPG1:000 to MSA-2012:VPG1:000
Group Name Group 0
Compare Type Offline
Priority 1
Compare Status Serial Scheduled
I/O Size 64 KB
Compare State 0% Complete
Compare Performance 0 MBps
Start Time ---
End Time ---
Delta Time ---
Source Array CX-320-A
Source Lun VPG:ID 1:0
Source Lun WWULN 60:06:01:60:96:02:1a:00:84:f3:f5:81:89:9e:de:11
Source Lun Size 10.00 GB
Destination Array MSA-2012
Destination Lun VPG:ID 1:0
Destination Lun WWULN 60:0c:0f:f0:00:d5:9c:a4:31:d4:a9:4a:01:00:00:00