User`s guide

5–Command Line Interface
target rescan
5-56 ISR654606-00 A
target rescan
Scans the target ports to see if one or more data LUNs are exposed to the router
ports from the target. This command causes the router to create an array entity for
the target ports through which the router is able to see data LUNs. The router
deletes those ports from show targets output (see “show targets” on
page 5-54).
Session admin
Example The following example shows the target rescan command:
MPX200 (admin) #> target rescan
Scanning Target WWPN 00:00:02:00:00:00:00:00
Target Rescan done
Scanning Target WWPN 00:00:01:00:00:00:00:00
Target Rescan done
Scanning Target WWPN 00:00:03:00:00:00:00:00
Target Rescan done
Scanning Target WWPN 50:08:05:f3:00:1a:15:11
Target Rescan done
Scanning Target WWPN 50:08:05:f3:00:1a:15:19
Target Rescan done
Target Re-Scan completed