User`s guide

5–Command Line Interface
show vpgroups
ISR654606-00 A 5-55
show vpgroups
Lists the status and WWPN for each virtual port group (VP group).
The router’s Fibre Channel ports can present four virtual ports (if enabled) to zone
with Fibre Channel targets and allow the target to expose more LUNs to the
router. The router provides the VP group by combining virtual port entities from
each Fibre Channel port. Every VP group consists of one virtual port from each
Fibre Channel port. Because there are four virtual ports per Fibre Channel port,
there are four VP groups.
Session miguser
Example The following example shows the show vpgroups command.
MPX200 <1> (miguser) #> show vpgroups
VpGroup Information
---------------------
Index 1
VpGroup Name VPGROUP_1
Status Enabled
WWPNs 21:00:00:c0:dd:12:f4:f2
21:00:00:c0:dd:12:f4:f3
Index 2
VpGroup Name VPGROUP_2
Status Enabled
WWPNs 21:01:00:c0:dd:12:f4:f2
21:01:00:c0:dd:12:f4:f3
Index VPGROUP_3
Status Enabled
WWPNs 21:02:00:c0:dd:12:f4:f2
21:02:00:c0:dd:12:f4:f3
Index 4
VpGroup Name VPGROUP_4
Status Enabled
WWPNs 21:03:00:c0:dd:12:f4:f2
21:03:00:c0:dd:12:f4:f3