User`s guide

5–Command Line Interface
show migration_luninfo
5-40 ISR654606-00 A
show migration_luninfo
Provides the current status and path information for any array LUN. Use this
command to check the usability of a path in failover scenarios. The paths
specified as passive are not used by data migration jobs if the current path fails.
The passive path is only capable of reading the LUN size, vendor, and product
information, but cannot perform any I/O operation.
Session miguser
Example The following example shows the show migration_luninfo command.
MPX200 <1> (miguser) #> show migration_luninfo
Index WWPN, PortId Symbolic Name Target Type
----- --------------------------------- -------------------- -------------
0 50:06:01:68:41:e0:18:94, 60-02-00 CX-320-B Src+Dest
1 50:06:01:68:41:e0:49:2e, 02-06-00 CX-340 Src+Dest
2 50:06:01:60:41:e0:18:94, 02-02-00 CX-320-A Source
3 20:78:00:c0:ff:d5:92:e5, 02-04-00 MSA-2012 Destination
Please select a Target from the list above ('q' to quit): 3
Index (LUN/VpGroup)
----- -------------
0 0/VPGROUP_1
1 1/VPGROUP_1
2 2/VPGROUP_1
3 3/VPGROUP_1
4 4/VPGROUP_1
5 0/VPGROUP_2
6 1/VPGROUP_2
7 2/VPGROUP_2
8 3/VPGROUP_2
9 4/VPGROUP_2
10 0/VPGROUP_3
11 1/VPGROUP_3
12 2/VPGROUP_3
13 3/VPGROUP_3
14 4/VPGROUP_3
15 0/VPGROUP_4
16 1/VPGROUP_4
17 2/VPGROUP_4