User`s guide

5–Command Line Interface
show luninfo
5-38 ISR654606-00 A
show luninfo
Displays the status of LUN objects identified by the DMS.
Session miguser
Notes The show luninfo command displays all the LUNs that are seen by the
MPX200 and their size and path information. To view a list of just all LUNs without
the details, run the show luns command instead.
Example The following example shows the show luninfo command:
MPX200 (miguser) #> show luninfo
MPX200 <1> (admin) #> show luninfo
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:78:00:c0:ff:d5:9a:05,20:78:00:c0:ff:d5:9a:05
1 20:78:00:c0:ff:d5:9a:05,21:78:00:c0:ff:d5:9a:05
2 50:06:01:60:cb:a0:35:de,50:06:01:60:4b:a0:35:de
3 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:49
4 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:18
5 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:1b
Please select a Target from the list above ('q' to quit): 5
Index (LUN/VpGroup)
----- -------------
0 0/VPGROUP_1
1 1/VPGROUP_1
2 2/VPGROUP_1
3 3/VPGROUP_1
4 4/VPGROUP_1
5 5/VPGROUP_1
6 6/VPGROUP_1
7 7/VPGROUP_1
8 8/VPGROUP_1
Please select a LUN from the list above ('q' to quit): 1
LUN Information
-----------------
WWULN 60:05:08:b4:00:05:4d:94:00:00:f0:00:35:a1:00:00