User`s guide

5–Command Line Interface
show fc
5-32 ISR654606-00 A
show fc
Displays the port status and link status of each Fibre Channel port, along with the
port name and node name.
Session admin
Example The following example shows the show fc command:
MPX200 <1> (admin) #> show fc
FC Port Information
---------------------
FC Port FC1
Port Status Enabled
Port Mode FCP
Link Status Up
Current Link Rate 8Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:13:2c:60 (VPGROUP_1)
WWPN 21:00:00:c0:dd:13:2c:60 (VPGROUP_1)
Port ID 8c-0a-00 (VPGROUP_1)
WWNN 20:01:00:c0:dd:13:2c:60 (VPGROUP_2)
WWPN 21:01:00:c0:dd:13:2c:60 (VPGROUP_2)
Port ID 8c-0a-01 (VPGROUP_2)
WWNN 20:02:00:c0:dd:13:2c:60 (VPGROUP_3)
WWPN 21:02:00:c0:dd:13:2c:60 (VPGROUP_3)
Port ID 8c-0a-02 (VPGROUP_3)
WWNN 20:03:00:c0:dd:13:2c:60 (VPGROUP_4)
WWPN 21:03:00:c0:dd:13:2c:60 (VPGROUP_4)
Port ID 8c-0a-04 (VPGROUP_4)
Firmware Revision No. 5.01.03
Frame Size 2048
Execution Throttle 256
Connection Mode Point-to-Point
SFP Type 8Gb
FC Port FC2
Port Status Enabled
Port Mode FCP
Link Status Up
Current Link Rate 8Gb
Programmed Link Rate Auto