Product specifications

B–Assigning LUNs to the MPX200 for Data Migration
Assigning LUNs from an EVA 4/6/8000 Series Array
ISR654605-00 A B-17
To assign LUNs:
1. Perform zoning as follows:
a. Connect the Fibre Channel ports of the data migration appliance to a
switch where the storage controller ports are also logged.
b. Using switch management tools, create a zone, DM_Host_EVA.
c. In this zone, add the WWPN of the data migration appliance Fibre
Channel ports and storage controller ports.
d. Save the zoning information and activate the new zoning configuration.
2. Open the Command View EVA application, as shown in Figure B-17.
Figure B-17 Opening Command View EVA
3. In the left pane, double-click the array that you want to manage. This
expands the nodes under the selected array.
4. In the left pane, click the Hosts node.