Product specifications

B–Assigning LUNs to the MPX200 for Data Migration
Assigning LUNs from an IBM DS4K/DS5K/LSI Array
B-12 ISR654605-00 A
Figure B-12 Modifying Mapping
15. Refresh the data migration user interface to see if the LUN assignment is
reflected properly, and that the appropriate array entity appears under FC
Array. You may have to reboot the data migration appliance or generate a
registered state change notification (RSCN) to initiate a full rescan on HDS
array, because it does not send any notification indicating changes in LUN
assignment to the logged in initiators.
Assigning LUNs from an IBM DS4K/DS5K/LSI
Array
To assign LUNs:
1. Perform zoning as follows:
a. Connect the Fibre Channel ports of the data migration appliance to a
switch where the storage controller ports are also logged.
b. Using switch management tools, create a zone, DM_Host_IBM.
Storage Vendor IBM
Array Model
IBM DS4000/Engineo series arrays
LUN Assignment Tool
Storage Manager Client 1e