User`s guide

1–Getting Started
Connecting SANsurfer Router Manager to the Router
1-6 ISR654602-00 H
Starting SANsurfer Router Manager on Linux or Solaris
On Red Hat/SUSE Linux and Solaris SPARC/x86 systems, follow these steps to
start SANsurfer Router Manager.
To start SANsurfer Router Manager on Linux or Solaris:
1. Ensure that you are in a graphical user environment, such as Xwindows.
2. Open a command terminal.
3. Change to the directory where you installed SANsurfer Router Manager.
4. Type SANsurferRouterManager, and then press
ENTER .
The SANsurfer Router Manager main window opens (see “Main Window” on
page 2-2).
Starting SANsurfer Router Manager on Macintosh
On Macintosh systems, follow these steps to start SANsurfer Router Manager.
To start SANsurfer Router Manager on Macintosh:
1. Open Finder.
2. Browse to the folder where you installed SANsurfer Router Manager.
3. Double-click the SANsurfer Router Manager icon:
The SANsurfer Router Manager main window opens (see “Main Window” on
page 2-2).
Connecting SANsurfer Router Manager to the
Router
Follow the steps in this section to connect SANsurfer Router Manager to the
iSR6200 router.
To connect SANsurfer Router Manager to the iSR6200:
1. Open the Connect to Router dialog box using any of the following methods:
 On the toolbar, click Connect: