User`s guide

B–Log Messages
B-16 ISR654602-00 H
74660 #%d: QLReadyTimer: Abort pTpb=%p failed,
DrvCount 0x%x
iSCSI Error iSCSI processor failed to complete an abort request.
74661 #%d: QLTimer: Abort pTpb=%p, Type %x,
Timeout 0x%x DrvCount 0x%x, DdbIndex 0x%x
iSCSI Error Driver timed out an iSCSI processor operation and is
aborting the operation.
74663 #%d: QLReadyTimer:
MBOX_CMD %04x %04x %04x %04x
%04x %04x %04x %04x timed out
iSCSI Error Driver timed out an iSCSI processor mailbox com-
mand.
74665 #%d: QLReadyTimer: QLiSNSReenable failed. iSCSI Error Driver timed out while attempting to reconnect with
the iSNS.
74705 #%d: QLProcessSystemError: Restart RISC iSCSI Error iSCSI processor was restarted.
74746 #%d: QLInitializeFW:
MBOX_CMD_INITIALIZE_FIRMWARE failed %04x
%04x %04x %04x %04x %04x
iSCSI Error iSCSI processor rejected the firmware initialize com-
mand.
74784 #%d: QLUpdateInitiatorData: No more room
in Initiator Database.
iSCSI Error Driver’s initiator database is full. The driver is capable
of storing 1024 iSCSI initiators in its database. Use
the CLI or GUI to remove unwanted/unused iSCSI
initiators.
74800 #%d: QLSetTargetData: No more room in Tar-
get Database.
iSCSI Error Driver’s target database is full. Use the CLI or GUI to
remove unwanted/unused iSCSI targets.
75008 #%d: ql_process_error: OB_TCP_IOCB_RSP_W
returned DdbInx 0x%x pTpb %p
iSCSI Error A TCP retry for a frame failed on the connection
ddbIndex. Tpb contains the frame memory address.
86347 #%d: QLDisable: Restart RISC iSCSI Info Restart iSCSI processor (RISC).
Table B-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description