User`s guide

B–Log Messages
ISR654602-00 H B-3
41077 QLBA_CreateInitiatorObject: Too many ini-
tiators
App Error Unable to create an object for initiator object;
exceeded the maximum number of initiators.
41096 QLBA_DisplayTargetOperationStatus: PCI
Error, Status 0x%.2x
App Error Process control block status indicates that a PCI
error occurred during a target operation.
41106 QLBA_DisplayInitiatorOperationStatus: DMA
Error, Status 0x%.2x
App Error Process control block status indicates that a DMA
error occurred during an initiator operation.
41107 QLBA_DisplayInitiatorOperationStatus:
Transport Error, Status 0x%.2x
App Error Process control block status indicates that a transport
error (protocol) occurred during an initiator operation.
41111 QLBA_DisplayInitiatorOperationStatus:
Data Overrun, Status 0x%.2x
App Error Process control block status indicates that a data
overrun error occurred during an initiator operation.
41234 QLIS_LoginPduContinue: Operation failed.
Initiator 0x%x, TPB status 0x%x
App Error iSCSI login failed between receipt of protocol data
unit (PDU) and request for the data segment.
41238 QLKV_ValidateLoginTransitCsgNsgVersion
failed (status 0x%x)
App Error iSCSI login failed due to unsupported version number
in the received login PDU.
41257 QLIS_LoginPduContinue: Invalid initiator
name. Initiator:
App Error iSCSI Login PDU contains invalid initiator name. The
format and character set used to form the initiator
name is invalid.
41265 QLIS_LoginPduContinue: Target not config-
ured for Portal
App Error iSCSI target login was attempted to a portal (iSCSI1
or iSCSI2) on which the target is not presented.
41267 QLIS_LoginPduContinue: Target not found.
Target name:
App Error iSCSI Login PDU received for a target with a target
name unknown to the router.
Table B-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description