Installation guide

4–Configuration
Controlling per Host LUN Access on the iSR6200
4-28 ISR651101-00 C
The LUN Masking Configuration Status window lists the mapping requests,
as shown in Figure 4-24.
Figure 4-24 Target Presentation/LUN Mapping Wizard - LUN Masking
Configuration Status
8. Verify the completion status shown on the LUN Masking Configuration
Status window, and then click Finish to close the wizard.
You can map additional LUNs using either SANsurfer Router Manager or the
command line interface (CLI). The iSCSI host cannot access mapped LUNs until it
logs into the presented target for the corresponding iSR6200 Virtual Port Group
and Fibre Channel target WWPN.
Figure 4-25 uses color coding to identify the LUN mapping that became available
after the host logged into the presented targets.
NOTE:
The default password is config.