Installation guide

4–Configuration

Controlling per Host LUN Access on the iSR6200

ISR651101-00 C 4-25

Figure 4-19 Logging into Target After Mapping LUN 1

You can accomplish the same LUN mapping using the SANsurfer Router

Manager’s Presentation Wizard.

To map LUN 1 to an initiator using the Router Manager:

1. On the Wizards menu, click Presentation Wizard.

2. Expand the router blade node (identified by its IP address), the virtual port

group node, and the device node.

3. Select LUN1 as shown in Figure 4-20, and then click Next.

Host accessible LUNs

Storage Array

21:00:00:c0:dd:13:16:f8

21:01:00:c0:dd:13:16:f8

21:02:00:c0:dd:13:16:f8

21:00:00:c0:dd:13:16:f8

21:00:00:c0:dd:13:16:f9

iSR6200

Blade 1

FC1

FC2

Host Entities

Host Entity 0

21:01:00:c0:dd:13:16:f8

21:01:00:c0:dd:13:16:f9

Host Entity 1

21:02:00:c0:dd:13:16:f8

21:02:00:c0:dd:13:16:f9

Host Entity 2

21:00:00:c0:dd:13:16:f9

21:01:00:c0:dd:13:16:f9

21:02:00:c0:dd:13:16:f9

LUN 1

LUN 2

LUN 3

LUN 4

LUN 5

LUN 6

iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970

Log-In

LUN 1