Installation guide

4–Configuration

Connecting iSCSI Hosts to your iSR6200

ISR651101-00 C 4-17

The following example shows the anatomy of a sample IQN string from an

iSR6200 router:

iqn.2004-08.com.qlogic:iSR6200.0834e00019.b1.01.20030020c2075970

1. Vendor name and registration date

2. Product Name

3. iSR6200 Chassis Serial Number

4. Blade (b1 or b2)

5. VPGroup (01 through 04)

6. Fibre Channel target WWPN

Notice that the IQN string does not contain any information about which iSR6200

physical iSCSI port you are connecting to. iSCSI load balancing and failover are

handled by the iSCSI host and not on the iSR6200.

Also notice the IQN string does not contain any information about which physical

Fibre Channel port on the iSR6200 the Fibre Channel target device is attached

through.

You can view the complete list of IQN strings your iSR6200 is presenting with the

show presented_targets command in the CLI. For example:

iSR6200 <1> (admin) #> show presented_targets

Presented Target Information

------------------------------

iSCSI Presented Targets

-------------------------

Name iqn.2004-08.com.qlogic:iSR6200.0834e00019.r1.00.20030020c2075970

Alias

WWNN 10:00:00:20:c2:07:59:70

WWPN 20:03:00:20:c2:07:59:70

Name iqn.2004-08.com.qlogic:iSR6200.0834e00019.r1.00.21040020c2075970

Alias

WWNN 10:00:00:20:c2:07:59:70

WWPN 21:04:00:20:c2:07:59:70

2 3