Installation guide

C–Log Messages
ISR651101-00 C C-27
139934 FcipRoute#%d Failed with Network
Configuration Error
User Error Network device configuration failed; could not add or
remove a network device instance. Verify the IP
addresses, mask, gateway, and Ethernet port speci-
fied in the route definition
139935 FcipRoute#%d Failed with Persistence Read
Failure
User Error Read of FCIP Route definition from persistent mem-
ory failed. Reboot the router
139936 FcipRoute#%d Failed with Persistence
Write Failure
User Error Write of FCIP route definition to persistent memory
failed. Retry the route add or modify if the retry failed
reboot the router.
139937 FcipRoute#%d Failed with IP Address Reuse
Error
User Error Specified IP address is already in use in another
FCIP route definition. Verify that the address speci-
fied in the definition is correct. If you want to reuse
the address, you must first remove it from the other
route definition.
139938 FcipRoute#%d Add Failed because relevant
FCIP Licence not available
User Error Router is not licensed for FCIP. Contact your sales
representative for information on how to obtain a
license
151842 FW Upgrade performed: new version is:
%d.%d.%d.%d
User Info A firmware upgrade was performed, the new version
is: d.d.d.d.
151843 REBOOT/SHUTDOWN Command from user.
Code=%d
User Info User issued a REBOOT or SHUTDOWN command.
151889 #%d: qapisetfcinterfaceparams_1_svc: FC
port configuration changed
User Info The Fibre Channel port configuration has changed.
Table C-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Typ e
Msg.
Typ e
Description