Installation guide

7–Removal and Replacement
iSR6200 Chassis Blades
ISR651101-00 C 7-5
Removing the Failed Blade
To remove a failed blade from an iSR6200 chassis with a single blade:
1. Log all iSCSI initiators out of the iSR6200 blade you are replacing prior to
replacing the iSR6200 router blade.
2. Save the blade’s FRU using either SANsurfer Router Manager or the CLI
fru save command. The following example shows how to perform this
using CLI commands.
iSR6200 login: guest
Password:
Wind River Linux glibc_small (cgl) 1.5
******************************************************
* *
* iSR6200 *
* *
******************************************************
QRouter #>
blade 1
QRouter <1> #> admin start
Password : ******
QRouter <1> (admin) #> fru save
FRU save completed. Configuration File is iSR6200_FRU.bin
Please use FTP to extract the file out from the System.