Installation guide

1–Introduction
iSR6200 Router Blades
ISR651101-00 H 1-7
The following sections illustrate and describe the physical features and
functionality of the iSR6200 router blades:
 “iSR6200 Router Family Models” on page 1-7
 “Router Blade LEDs” on page 1-9
 “Maintenance Button” on page 1-10
 “Fibre Channel Port LEDs” on page 1-12
 “Fibre Channel Transceivers” on page 1-13
 “Gigabit Ethernet Port LEDs” on page 1-14
 “Ethernet Port—Management” on page 1-14
 “Serial Port” on page 1-15
iSR6200 Router Family Models
The iSR6200 family includes router models distinguished by their expansion ports,
located in the top-center area of each router blade. The following sections identify
the add-on ports on the different iSR6200 router models:
 “iSR6260 Router Blade” on page 1-7
 “iSR6250 Router Blade” on page 1-7
 “iSR6240 Router Blade” on page 1-8
iSR6260 Router Blade
The iSR6260 router blade adds two more Fibre Channel ports to the blade
configuration. Each port has the following capacity:
 Auto-negotiating transmission rates of 2, 4, or 8Gb
 Hot-pluggable SFP Fibre Channel connector
 N_Port, NL_Port, or transparent port type
Figure 1-6. Fibre Channel Ports on the iSR6260 Router Blade
iSR6250 Router Blade
The iSR6250 router blade adds two 10Gb Ethernet (GbE) ports to the blade
configuration. Each port has the following capacity:
 10GbE iSCSI ports that run in full duplex mode
 Support for jumbo frames
2Gb (Amber)4Gb (Green)8Gb (Yellow)