Installation guide

ISR651101-00 H xv
 Internet engineering task force (IETF): iSCSI Requirements and Design
Considerations, iSCSI Naming and Discovery, Internet Protocol
Specification (IPv4), RFC793
 Transmission Control Protocol (TCP) Specification, RFC1122, Requirements
for Internet Hosts-Communication Layers
 TCP Extensions for High Performance, RFC1323
 TCP Congestion Control, RFC2581
 ANSI SCSI: SCSI-3 Architecture Model (SAM), X3T10/994D/Rev 18,
SCSI-3 Controller Command Set, X3T10/Project 1047D/Rev 6c. IEEE:
802.1Q Virtual LAN (VLAN), 802.1p Priority of Service, 802.3x Flow Control,
802.3ad Link Aggregation
 SCSI-3 Fibre Channel Protocol (SCSI-FCP), X3.269:1996
 Fibre Channel Physical and Signaling Interface (FC-PH), X3.230:1994
 Fibre Channel 2nd Generation (FC-PH-2), X3.297:1997
 Third Generation Fibre Channel Physical and Signaling Interface (FC-PH-3),
X3.303:1998
 Fibre Channel-Arbitrated Loop (FC-AL-2), working draft, revision 6.4, August
28, 1998
 Fibre Channel Fabric Loop Attachment Technical Report (FC-FLA)
NCITS/TR-20:1998, Fibre Channel-Private Loop Direct Attach Technical
Report (FC-PLDA)
 SCSI Fibre Channel Protocol-2 (FCP-2) working draft, revision 3, October1,
1999
 ANSI Information Technology-SCSI 3 Architecture Model, revision 18,
November 27, 1995
For information about downloading documentation from the QLogic Web site, see
“Downloading Updates” on page xx.
Documentation Conventions
This guide uses the following documentation conventions:
 NOTE provides additional information.
 CAUTION without an alert symbol indicates the presence of a hazard that
could cause damage to equipment or loss of data.
 CAUTION with an alert symbol indicates the presence of a hazard that
could cause minor or moderate injury.
!