Installation guide

7–Removal and Replacement
iSR6200 Chassis Blades
ISR651101-00 H 7-7
Figure 7-5. iSR6200 Router Blade with Cables Disconnected
5. Remove the old blade from the chassis. Figure 7-6 shows how to release
the latch and pull down on the lever on the right side (1), and then pull
straight back on the handle (2).
Figure 7-6. Removing the Chassis Blade
Installing the Replacement Blade
Before replacing a blade for a single-blade router installation, you must first
remove it (as described on page 7-5).
(1)
(2)