Installation guide

16
Chassis Name
Serial Number 0951F00579
HW Version 31896-02 B
Fan Speed Normal
Blade 1 Information (Left Slot)
-------------------------------
Status Online
Product Name iSR6200
Symbolic Name Blade-1
Serial Number 0952F00032
HW Version 31895-03 A
SW Version 3.1.0.2
Temp (Front/Rear/CPU1/CPU2) 40C/28C/35C/33C
Power Cooling Module 1
----------------------
Status Installed
Power Source Connected
Fan1/Fan2/Fan3 Healthy/Healthy/Healthy
Blade 2 Information (Right Slot)
--------------------------------
Status Online
Product Name iSR6200
Symbolic Name Blade-2
Serial Number 0952F00019
HW Version 31895-03 A
SW Version 3.2.0.0rc6b2
Temp (Front/Rear/CPU1/CPU2) 35C/25C/31C/33C
Power Cooling Module 2
----------------------
Status Installed
Power Source Not Connected
Fan1/Fan2/Fan3 Healthy/Healthy/Healthy
iSR6200 #>
Using the GUI to Locate the Serial Number
The following shows how to locate the serial number using the SANsurfer Router Manager utility provided by QLogic.
Refer to the iSR6200 Router Manager User’s Guide for specific information regarding the management utility.
To find the serial number of your blade from SANsurfer Router Manager, follow these steps:
1. In the SANsurfer Router Manager’s left pane, click the Router tab.
2. In the left pane’s router tree, click Blade 1.
3. In the right pane on the Information page, locate and write down the Serial Number shown under
Basic Information (see Figure 12).
4. Repeat the preceding steps to determine the Blade 2 serial number.