Installation guide

13
d. On the Select the Initiators for the LUN Presentation window (Figure 10), select the initiators
for the LUN presentation, and then click Next.
Figure 10. Target Presentation/LUN Mapping Wizard
e. To save your mappings, click Save, and then enter your management password.
f. To refresh the SANsurfer Router Manager display, click Refresh.
Now, when you select your iSCSI initiator in the left pane of the SANsurfer Router Manager
window, you should be able to see the LUNs mapped to that initiator on the LUN List page, as
shown in Figure 11.
Figure 11. LUN List Page