Installation guide

11
❑ From the server with iSCSI initiators, run a discovery session for the iSCSI port IP address
of the iSR6200. This automatically registers the iSCSI initiator names with the iSR6200.
Running the iSCSI discovery session on different OS environments may vary. The following
example illustrates how to run an iSCSI discovery session on a Windows Server.
To run a discovery session on Windows Server:
a. Install an iSCSI initiator on your server. This can be either a dedicated iSCSI adapter or a
software initiator for Windows like the one available from www.microsoft.com
.
b. Invoke the software initiator, and then specify the IP address of the iSCSI port on your
iSR6200.
c. On the iSCSI Initiator Properties dialog box, click the Targets tab.
d. On the Targets page (see Figure 8), select a target and then click Log On.
Figure 8. iSCSI Initiator Properties
4. Present LUNs to the iSCSI initiator as follows:
a. To refresh the SANsurfer Router Manager display, click Refresh.