Installation guide

B–Log Messages
Fatal Log Messages
ISR651103-00 C B-25
Table B-13. iSCSI Driver—Fatal Log Messages
ID Log Message No. Description
69652 #%d: qlutm_init: Diagnostic failed, invalid SRAM
20
iSCSI processor SRAM test failed.
69653 #%d: qlutm_init: Diagnostic failed, fail reboot
21
iSCSI processor failed diagnostic reboot.
69654 #%d: qlutm_init: Diagnostic failed, invalid NVRAM
22
iSCSI processor failed NVRAM diagnostic.
69655 #%d: qlutm_init: Diagnostic failed, invalid DRAM
23
iSCSI processor failed DRAM diagnostic.
69656 #%d: qlutm_init: Failed to return diagnostic
result to Bridge
24
iSCSI processor failed to return diagnostic results.
69941 #%d: QLUtmProcessResponseQueue: Invalid
handle %x EntryType %x
309
Response queue entry contains an invalid handle.
69951 #%d: QLSetNvram: QLRebootTimer failed AF %x RS %x
Time %d
319
Set NVRAM reboot timer failed.
69964 #%d: QLDisable: QLRebootTimer failed AF %x RS %x
Time %d
332
Port disable reboot timer failed.
69966 #%d: QLEnable: QLRebootTimer failed AF %x RS %x
Time %d
334
Port enable reboot timer failed.
70224 #%d: QLProcSrblessiSNSResponse: Invalid
handle %x
592
iSNS response contains an invalid handle.
70400 #%d: QLInitializeDevice: QLStartAdapter failed
768
Start iSCSI processor failed.
70417 #%d: QLInitializeAdapter: QLInitializeFW failed
785
iSCSI processor firmware initialization failed.
70432 #%d: QLDoInterruptServiceRoutine: PortFatal
interrupt. PortFatalErrorStatus %08x CSR %08x
AS %x AF %x
800
iSCSI processor port fatal error.