Installation guide

B–Log Messages
Error Log Messages
ISR651103-00 C B-21
106928 #%d: QLMarkDeviceOffline: Device Id: %x marked
offline, cLinkDownTimeout = %x,
cPortDownRetryCount=%x
432
The driver was unable to re-establish connection to the
target within the timeout and retry counts, and is therefore
marking it offline.
106948 #%d: QLSnsGetAllNext: Name server login FAILED %x
452
The Fibre Channel processor is unable to log into the
Fibre Channel fabric name server.
107029 #%d: QLUpdateDeviceData: out of slots in host
database
533
The driver’s host (initiator) database is full.
107030 #%d: QLUpdateDeviceData: out of slots in target
database
534 The driver’s target database is full.
107041 #%d: QLUpdateDeviceDatabase 0x%x: GET_ID
failed %x
545
The driver’s target database is full.
107056 #%d: QLUpdateDeviceDatabase 0x%x: out of slots
in host database
560
The driver’s host (initiator) database is full. Maximum host
database is 64.
107058 #%d: QLUpdateDeviceDatabase 0x%x:
MBOX_CMD_GET_VP_DATABASE failed %x
562
Fibre Channel processor "Get VP Database entry
command" failed.
107078 #%d: QLUpdatePort 0x%x: out of slots in host
database
582
The drivers host (initiator) database is full.
107254 #%d: QLUpdateSinglePortCont 0x%x: out of slots
in host database
758
No slots available in host database.
107267 #%d: QLFcipIsrEventHandler: System error event
(%x), MB1=%x, MB2=%x, MB3=%x, MB4=%x, MB5=%x,
MB6=%x, MB7=%x
771
FCIP system error event.
Table B-10. Fibre Channel Driver—Error Log Messages (Continued)
ID Log Messages No. Description