Installation guide
B–Log Messages
Error Log Messages
ISR651103-00 C B-19
Fibre Channel Driver
Table B-10 lists the error log messages common to both Fibre Channel ports, 1 (FC1) and 2 (FC2). Log messages
beginning with #0 denote Fibre Channel port 1 (FC1); log messages beginning with #1 denote Fibre Channel port 2
(FC2).
74663 #%d: QLReadyTimer: MBOX_CMD %04x %04x %04x %04x
%04x %04x %04x %04x timed out
935 The driver timed out an iSCSI processor mailbox com-
mand.
74665 #%d: QLReadyTimer: QLiSNSReenable failed. 937 The driver timed out while attempting to reconnect with
the iSNS.
74784 #%d: QLUpdateInitiatorData: No more room in Ini-
tiator Database.
1056 The driver’s initiator database is full. The driver is capa-
ble of storing 1024 iSCSI initiators in its database. Use
the CLI or Router Manager to remove unwanted/unused
iSCSI initiators.
74800 #%d: QLSetTargetData: No more room in Target
Database.
1072 The driver’s target database is full. Use the CLI or
Router Manager to remove unwanted/unused iSCSI tar-
gets.
Table B-10. Fibre Channel Driver—Error Log Messages
ID Log Messages No. Description
106583 #%d: QLUtmReceiveIo: Path invalid/FW No resource
count %x
87
The Fibre Channel processor received a SCSI command
for an unknown target path or has run out of resources to
execute additional commands.
Table B-9. iSCSI Driver—Error Log Messages (Continued)
ID Log Message No. Descriiption