Installation guide

B–Log Messages
Error Log Messages
B-18 ISR651103-00 C
iSCSI Driver
Table B-9 lists the error log messages common to all iSCSI ports: 1 (GE1), 2 (GE2), 3 (GE3), and 4 (GE4). Log
messages beginning with #0 denote iSCSI port 1 (GE1), #1 denotes iSCSI port 2 (GE2), #2 denotes iSCSI port 3
(GE3), and #3 denotes iSCSI 4 (GE4).
Table B-9. iSCSI DriverError Log Messages
ID Log Message No. Descriiption
73990 #%d: QLUtmIoctlEnable: Initialize FW failed 262 The iSCSI processor failed firmware initialization.
74046 #%d: QLPortUp: MBOX_CMD_SET_PORT_CONFIG %04x
failed %04x
318 The iSCSI processor command to enable a GE port
failed.
74056 #%d: QLRunDiag: MBOX Diag test internal loopback
failed %x %x
328 The iSCSI processor failed the internal loopback test.
74057 #%d: QLRunDiag: MBOX Diag test external loopback
failed %x %x
329 The iSCSI processor failed the external loopback test.
74065 #%d: QLPortDown: MBOX_CMD_SET_PORT_CONFIG %04x
failed %04x
337 The iSCSI processor command to disable a GE port
failed.
74241 #%d: QLiSNSEnableCallback: iSNS Server TCP Con-
nect failed
513 The iSCSI processor could not connect with the iSCSI
name server (iSNS).
74577 #%d: QLIsrDecodeMailbox: NVRAM invalid 849 The iSCSI processor reported that the iSCSI port
NVRAM contains invalid data (checksum error).
74587 #%d: QLIsrDecodeMailbox: Link down 859 The iSCSI processor reported a link down condition.
74656 #%d: QLReadyTimer: Adapter missed heartbeat
for %d seconds. Time left %d
928 The driver failed to receive a heartbeat from the iSCSI
processor for the specified number of seconds.
74661 #%d: QLTimer: Abort pTpb=%p, Type %x, Timeout
0x%x DrvCount 0x%x, DdbIndex 0x%x
933 The driver timed out an iSCSI processor operation and is
aborting the operation.