Installation guide

B–Log Messages
Error Log Messages
B-14 ISR651103-00 C
41769 QLBI_GetLunList: REPORT LUNS command failed with
CHECK CONDITION, SCSI STATUS 0x%02X
809
Report LUNs command failed with check condition
status. The Report LUNs command was issued by the
router as part of its discovery process.
41771 QLBI_GetLunList: Lun allocation failed for
LunId %d
811
Failed to allocate LUN object: out of resources.
41994 QLFC_Login: VpIndex (%d) out of range
1034
Login attempted using Fibre Channel virtual port (VP)
index that is out-of-range (range = 0–31). Index reported
in log message.
41995 QLFC_Login: VP Index 0x%x not configured
1035
Login attempted using Fibre Channel VP index that has
not been configured. Operation attempted on an
unconfigured VP.
42002 QLFC_Login: Can't open connection
1042
Attempting login but Fibre Channel connection cannot be
opened.
42024 QLFC_Logout: No active path to device. WWPN:
%.2X%.2X%.2X%.2X%.2X%.2X%.2X%.2X
1064
Attempting logout of device for which there is no active
path (WWPN not found).
42027 QLFC_Logout: VP Index 0x%x not configured
1067
Logout attempted using Fibre Channel VP index that has
not been configured. Operation attempted on an
unconfigured VP.
42068 QLFC_HandleTeb: System Error
1108
Event notification: Fibre Channel processor encountered
a system error (unrecoverable firmware error).
42069 QLFC_HandleTeb: Driver Fatal Error
1109
Event notification: Fibre Channel driver encountered a
fatal error.
42072 QLFC_HandleTeb: FC Logout
1112
Event notification: Fibre Channel port logged out.
Table B-8. Application Modules—Error Log Messages (Continued)
ID Log Message No. Description