Installation guide

B–Log Messages
Error Log Messages
ISR651103-00 C B-13
41635 QLBI_GetLunInfo: QLBI_PassthruCommand failed for
READ CAPACITY
675
Pass-Through command for Read Capacity command
failed. The Read Capacity command was issued by the
router as part of its discovery process.
41636 QLBI_GetLunInfo: READ CAPACITY failed, TPB status
0x%x
676
Read Capacity command failed. The Read Capacity
command was issued by the router as part of its discovery
process.
41696 QLBI_PassthruCommandCompletion: Passthru command
aborted
736
Pass-Through command issued by management utiltiy
(such as Router Manager) was aborted.
41700 QLBI_Passthru: Invalid CDB length %d bytes
740
Pass-Through command issued by management utility
(such as the Router Manager) failed due to invalid CDB
length.
41701 QLBI_Passthru: Invalid data length %d bytes
741
Pass-Through command issued by management utility
(such as the Router Manager) failed due to invalid data
length.
41717 QLBI_PassthruCommand: command interrupted or
timed out
757
Pass-Through command issued by management
application (such as the Router Manager) was interrupted
or timed out.
41750 QLBI_Ioctl: ERROR: Operation (0x%x) not supported
in this mode
790
IOCTL operation unsupported. Operation code provided
in log message.
41768 QLBI_GetLunList: REPORT LUNS command failed
808
Report LUNs command failed. The Report LUNs
command was issued by the router as part of its discovery
process.
Table B-8. Application Modules—Error Log Messages (Continued)
ID Log Message No. Description