Installation guide

B–Log Messages
Error Log Messages
B-12 ISR651103-00 C
41283 QLIS_LoginPduContinue: TSIH 0x%x out of range
323
iSCSI Login PDU was received with a TSIH out of range.
This would occur if the iSCSI initiator attempting the login
failed to used the TSIH value provided in the Target Login
Response PDU (router is target) in subsequent login
PDUs.
41284 QLIS_LoginPduContinue: Session does not exist,
invalid TSIH 0x%x
324
iSCSI Login PDU was received with an invalid TSIH
value. The TSIH is invalid because there is no session
with that TSIH value. This would occur if the iSCSI initiator
attempting the login failed to used the TSIH value
provided in the target login response PDU (router is
target) in subsequent login PDUs.
41353 QLIS_LoginPduContinue CHAP Validation Failure
393
CHAP validation failed during login.
41354 QLIS_LoginPduContinue Unexpected CHAP key
detected
394
Unexpected CHAP key.
41508 QLBI_SetPortInfo: QLUT_AllocatePortalObject
failed (PortType 0x%x, PortId 0x%x)
548
Failed to allocate an object for Set Port Info IOCTL
processing:
PortType: 0 = Fibre Channel, 1 = iSCSI
PortId: 0 = FC1 or iSCSI1(GE1), 1 = FC2 or iSCSI2 (GE2)
41626 QLBI_GetLunInfo: INQUIRY failed, TPB status 0x%x
666
Inquiry command failed. The Inquiry command was
issued by the router as part of its discovery process.
41629 QLBI_GetLunInfo: QLBI_PassthruCommand failed for
INQUIRY (page code 0x83)
669
Pass-Through command for Inquiry command for page
83 failed. The Inquiry command was issued by the router
as part of its discovery process.
Table B-8. Application Modules—Error Log Messages (Continued)
ID Log Message No. Description