Installation guide

B–Log Messages
Error Log Messages
B-10 ISR651103-00 C
Application Modules
Table B-8 lists the error log messages generated by the application modules.
Table B-8. Application Modules—Error Log Messages
ID Log Message No. Description
40967 QLBA_NullDoorbell: driver unloaded, port
disabled
7
NULL doorbell routine for unloaded drivers. When a driver
is unloaded, the doorbell routine is redirected to this NULL
routine.
40996 QLBA_ProcessTrb: Processing unsupported ordered
tag command
36
Processing unsupported ordered tag task management
command.
41004 QLBA_ProcessTrb: Processing unsupported head of
queue tag command
44
Processing unsupported head-of-queue task
management command.
41058 QLBA_CreateTargetDeviceObject: Too many devices
98
Unable to create an object for the target device: exceeded
the maximum number of target devices.
41060 QLBA_CreateTargetNodeObject: Too many devices
100
Unable to create an object for the target node: exceeded
the maximum number of target devices.
41067 QLBA_CreateLunObject: LunObject memory
unavailable
107
Memory unavailable for LUN object.
41077 QLBA_CreateInitiatorObject: Too many initiators
117
Unable to create an object for initiator object: exceeded
the maximum number of initiators.
41096 QLBA_DisplayTargetOperationStatus: PCI Error,
Status 0x%.2x
136
Process control block status indicates that a PCI error
occurred during a target operation.
41106 QLBA_DisplayInitiatorOperationStatus: DMA Error,
Status 0x%.2x
146
Process control block status indicates that a DMA error
occurred during an initiator operation.