Installation guide

B–Log Messages
Informational Log Messages
B-4 ISR651103-00 C
iSCSI Driver
Table B-2 lists the informational log messages that are common to all iSCSI ports: 1 (GE1), 2 (GE2), 3 (GE3), and 4
(GE4). Log messages beginning with #0 denote iSCSI port 1 (GE1), #1 denotes iSCSI port 2 (GE2), #2 denotes iSCSI
port 3 (GE3), and #3 denotes iSCSI 4 (GE4).
Fibre Channel Driver
Table B-3 lists the informational log messages that are common to both Fibre Channel ports: 1 (FC1) and 2 (FC2). Log
messages beginning with #0 denote Fibre Channel port 1 (FC1) and log messages beginning with #1 denote Fibre
Channel port 2 (FC2).
Table B-2. iSCSI Driver—Informational Log Messages
ID Log Message No. Description
86343 #%d: QLPortUp: Set link configuration 0x%x 327 iSCSI port enabled, port up.
86347 #%d: QLDisable: Restart RISC 331 Restart iSCSI processor (RISC).
86349 #%d: QLEnable: Restart RISC to update EEPROM 333 EEPROM updated, restart iSCSI processor (RISC).
86352 #%d: QLPortDown: Set link configuration 0x%x 336 iSCSI port disabled, port down.
86874 #%d: QLIsrDecodeMailbox: Link up 858 Link up reported by iSCSI processor for GE1 or GE 2.
Table B-3. Fibre Channel Driver—Informational Log Messages
ID Log Message No. Description
118882 #%d: QLIoctlDisable: Reset adapter 98 Request to reset the Fibre Channel processor (adapter)
received from IOCTL interface.