Installation guide

ISR651103-00 C A-1
A Simple Network
Management Protocol
(SNMP)
SNMP provides monitoring and trap functions for managing the router through
third-party applications that support SNMP. The router firmware supports SNMP
versions 1 and 2 and a QLogic (see page A-2). You may format the traps using
SNMP version 1 or 2 (see page A-10).
SNMP Properties
You can set the SNMP properties using either the command line interface (CLI)
(see the iSR6152 Router CLI Users Guide) or Router Manager (see the iSR6152
Router Manager Users Guide).
Table A-1 lists the SNMP properties.
Table A-1. SNMP Properties
Parameter Description
Read community A password that authorizes an SNMP management server to
read information from the router. This is a write-only field. The
value on the router and the SNMP management server must
be the same. The read community password can be up to
32 characters excluding the number sign (#), semicolon (;), and
comma (,). The default is password is public.
Trap community A password that authorizes an SNMP management server to
receive traps. This is a write-only field. The value on the router
and the SNMP management server must be the same. The
trap community password can be up to 32 characters excluding
the number sign (#), semicolon (;), and comma (,). The default
password is public.
System location Name of the router location. The name can be up to 64 charac-
ters excluding the number sign (#), semicolon (;), and comma
(,). The default is undefined.