Installation guide

3–Installation
Installing the Firmware
ISR651103-00 C 3-13
4. Use the put command to transfer the firmware image file from the
workstation to the router. For example:
ftp> put isr-6152-3_3_0_x.bin
200 PORT command successful.
150 Opening BINARY mode data connection for
'isr-6152-3_3_0_x.bin'.
226 Transfer complete.
ftp – 4822816 bytes sent in 0.41Seconds 11878.86Kbytes/sec.
5. Type quit.
The firmware image has been transferred to the router.
6. Log on to the router as an administrator. For example:
iSR6152 login: guest
Password: ********
Welcome to iSR6152
******************************************************
* *
* iSR6152 *
* *
******************************************************
iSR6152 #> admin start
Password : ******
iSR6152 (admin) #>
7. Type the following command from the router, where x stands for the
firmware image name:
image unpack isr-6152-3_3_0_x.bin
The following message appears:
Unpack Completed. Please reboot the system for FW to take
affect.
8. Type reboot.
The following message appears:
Are you sure you want to reboot the System (y/n):
9. To reboot the system, type y.