Installation guide

3–Installation
Installing the iSR6152 Router
3-8 ISR651103-00 C
 For Linux:
a. Set up minicom to use the serial port. Create or modify the
/etc/minirc.dfl file with the following content:
pr portdev/ttyS0
pu minit
pu mreset
pu mhangup
pr portdev/ttyS0 specifies port 0 on the workstation.
Choose the pr setting to match the workstation port
to which you connected the router.
b. Verify that all users have permission to run minicom. Review the
/etc/minicom.users file and confirm that the line ALL exists
or that there are specific user entries.
3. Connect the router to the power (see page 3-10).
Installing Router Manager
You can manage the router using the Router Manager utility. The following
sections describe how to install the utility on either a Windows or Linux
workstation. See the iSR6152 Router Manager User's Guide for information on
how to use the Router Manager.
Windows Installation
Perform the following steps to install Router Manager from the QLogic Web site to
a PC workstation.
To install Router Manager on Windows
1. Close all currently running programs.
2. Go to the QLogic Driver Downloads/Documentation page:
http://driverdownloads.qlogic.com
3. Under Downloads, click QLogic Products.
4. Under QLogic Products, click the Routers link.
5. In the product selection window, click the iSR6152 model number, and then
then click Go.
6. On the iSR6152 Downloads page under Management Tools, click the link
to the Router Manager for your operating system.
7. On the End User Software License Agreement page, read the license
agreement, and then click I Agree to continue.
8. Save the installation file to your local machine.
9. Run the Router Manager installer by following the system prompts.