Installation guide

3–Installation
Installing the iSR6152 Router
ISR651103-00 C 3-3
Prior to installing the router, unpack the router and accessories. The iSR6152
router is shipped with the following components, shown in Figure 3-1:
 Power cord.
 Adapter (RJ45 to DB9F) for connecting the router’s serial port to a
workstation used for configuring and managing the router. A standard Cat5
Ethernet cable is required (not supplied) to connect the adapter to the router.
The adapter connects directly to the workstation’s serial (COM) port.
Figure 3-1 iSR6152 Router and Accessories
To install the iSR6152 router:
1. Complete the pre-installation checklist (see page 3-4).
2. Mount the router (see page 3-4).
3. Install the transceivers (see page 3-6).
4. Connect the management workstation to the router (see page 3-6).
5. Configure the management workstation (see page 3-6).
6. Install the management utility (see page 3-8).
7. Start the management utility (see page 3-9).
8. Connect the router to AC power (see page 3-10).
9. Configure the router (see page 3-10).
10. Cable Fibre Channel and GbE devices to the router (see page 3-11).