Installation guide

ISR651103-00 C Index-3
iSR6152 Intelligent Storage Router
Installation Guide
Fibre Channel
error log messages B-19
over IP 1-2
performance 2-2
port, MIB A-6
ports 1-6
SFP transceivers 1-7
Fibre Channel driver
error log messages B-19
fatal log messages B-27
informational log messages B-4
Fibre Channel over IP, See FCIP
Fibre Channel protocol, See FCP
field replaceable unit, See FRU
firmware
installing 3-11
installing using CLI 3-12
FL_Port
definition of Glossary-3
loop topology support 2-7
Flash
iSCSI failure B-26
validation with POST 4-2
Flash BIOS, definition of Glossary-3
Flash, definition of Glossary-3
frame
definition of Glossary-3
incoming FCIP B-16
jumbo 2-2, 2-3
shuttle mode A-6
size, maximum 2-2
FRU
accessible parts support xv
CLI command, removing router 5-2
definition of Glossary-3
image API failure error B-23
removing and replacing 5-1
FTP services 2-8
G
G_Port
definition of Glossary-3
loop topology support 2-7
GbE
performance 2-3
port LEDs 1-8
general public license xvi
gigabit Ethernet, See GbE
glossary of terms Glossary-1
H
hardware, workstation requirements 3-1
heartbeat LED
blink pattern 1-3, 4-2, 4-3
boot image, selecting 1-5
definition of Glossary-4
DHCP, enabling 1-5
factory defaults, restoring 1-5
IP address, resetting 1-5
location of 1-3
router, powering up 3-10
router, resetting 1-4
system fault synchronized with 1-4
hot replaceable/hot swappable, definition of
Glossary-4
I
IANA
definition of Glossary-4
Fibre Channel port type A-7
image unpack command 3-12
image, boot, selecting 1-5
informational log messages B-1
application modules B-2
FCIP module B-8
Fibre Channel driver B-4
iSCSI driver B-4
system modules B-9