Installation guide

B–Log Messages
Fatal Log Messages
ISR651103-00 C B-29
TOE Driver
Table B-15 lists the fatal log messages generated by the TOE driver.
102747 #%d: QLProcessResponseQueueFS: Invalid buffer
type: %x
347
FCIP: Response queue entry contains an invalid buffer
type.
102748 #%d: QLProcessResponseQueueFS: Invalid EntryType
(0x%x)
348
FCIP: Response queue entry contains an invalid entry
type.
102749 #%d: QLProcessResponseQueueFS: Invalid handle
0x%x, type 0x%x
349
FCIP: Response queue entry contains an invalid handle.
102752 #%d: QLTimer: Ext Ram parity error exceed limit
cnt 0x%x, limit 0x%x, Disabled adapter
352
Fibre Channel processor external SRAM parity error
count exceeded limit: Fibre Channel port disabled.
102755 #%d: QLTimer: Heartbeat failed
355
Fibre Channel processor heartbeat failed.
102800 #%d: QLRestartRisc: restart RISC
400
Fibre Channel processor being restarted.
Table B-15. TOE—Fatal Log Messages
ID Log Message No. Description
200721 QL3022:ql3xxx_probe: Adapter eth#%d, Invalid
NVRAM parameters
17
Encountered invalid parameters in TOE NVRAM.
200725 QL3022:eth%x: Resetting chip. PortFatalErrStatus
register = 0x%x
21
TOE chip reset due to detection of fatal error.
Table B-14. Fibre Channel Driver—Fatal Log Messages (Continued)
ID Log Message No. Description