Installation guide

B–Log Messages
Fatal Log Messages
B-28 ISR651103-00 C
102657 #%d: QLInitializeAdapter: Load RISC code failed
257
Fibre Channel processor firmware load failed.
102658 #%d: QLInitializeAdapter: Load ISP2322 receive
sequencer code failed
258
Fibre Channel processor receive sequencer code load
failed.
102659 #%d: QLInitializeAdapter: Load ISP2322 transmit
sequencer code failed
259
Fibre Channel processor transmit sequencer code load
failed.
102662 #%d: QLInitializeAdapter: Verify Checksum
command failed (%x)
262
Fibre Channel processor firmware checksum failed.
102680 #%d: QLInitializeFW: FAILED
280
Fibre Channel processor firmware initialization failed.
102688 #%d: QLInterruptServiceRoutine: Risc pause %x
with parity error hccr %x, Disable adapter
288
Fibre Channel processor paused due to internal parity
error.
102689 #%d: QLInterruptServiceRoutine: Invalid
interrupt status: %x
289
Fibre Channel processor returned an invalid interrupt
status.
10691 #%d: QLFcipInterruptServiceRoutine: Risc pause
%x with parity error hccr %x, Disable adapter
291
Fibre Channel processor invalid interrupt status.
10692 #%d: QLFcipInterruptServiceRoutine: Invalid
interrupt status: %x
292
Fibre Channel processor paused due to RAM parity error.
102716 #%d: QLIsrEventHandler: System error event (%x),
MB1=%x, MB2=%x, MB3=%x, MB4=%x, MB5=%x, MB6=%x,
MB7=%x
316
Fibre Channel processor system error.
102746 #%d: QLProcessResponseQueue: Invalid handle %x,
type %x
346
Response queue entry contains an invalid handle.
Table B-14. Fibre Channel Driver—Fatal Log Messages (Continued)
ID Log Message No. Description