User`s guide

4 – Using the Wizards
Map Remote Initiator/Target Wizard
SN0054660-00 A 4-33
A
Map Remote Initiator/Target Wizard
The Map Remote Initiator/Target Wizard provides a set of dialog boxes that walk
you through the steps required for mapping an initiator to a target, one of which is
remote and the other local.
You can start this wizard at any time by selecting Map Remote Initiator/Target
Wizard from the Wizards Menu or from the Action Menu.
When the Map Remote Initiator/Target Wizard launches, the Device Selection
dialog box displays a list of devices, as shown in Figure 4-38. If necessary,
expand the router tree to see the attached devices.
Figure 4-38 Device Selection Dialog Box
To create a remote-to-local mapping between an initiator to a target:
1. Select the device to be mapped. The device may be a target or an initiator
and may be either on the remote router or on the local router.
2. Click Next.