User`s guide

4 – Using the Wizards
Add Remote Router Wizard
SN0054660-00 A 4-25
A
After completing the UnMap Local Initiator/Target Wizard you can verify the
unmapping by selecting the Initiator in the system tree under Discovered iSCSI
Initiators. Then select Local Presented Devices.
For the example shown in Figure 4-28, an iSCSI initiator was unmapped from an
FC target.
Figure 4-28 Discovered iSCSI Initiators - Local Presented Targets
Add Remote Router Wizard
The Add Remote Router Wizard provides a set of dialog boxes that walk you
through the steps required for assigning a remote router to your local router as a
peer.
You can start this wizard at any time by selecting Add Remote Router Wizard
from the Wizards Menu or from the Action Menu.
When the Add Remote Router Wizard launches, the Remote Router’s IP
Address dialog box requests the remote router’s IP address, as shown in
Figure 4-29.