User`s guide

4 – Using the Wizards
Unmap Local Initiator/Target Wizard
4-20 SN0054660-00 A
S
After completing the Map Local Initiator/Target Wizard, you can see the mapping
by selecting the mapped Initiator in the system tree under Discovered iSCSI
Initiators. Click the Local Presented Devices tab, as shown in Figure 4-23. In
this example an iSCSI initiator is mapped to an FC target, other mappings are
supported such as FC to FC, FC to iSCSI and iSCSI to iSCSI.
Figure 4-23 Discovered iSCSI Initiators - Local Presented Targets
Unmap Local Initiator/Target Wizard
The Unmap Local Initiator/Target Wizard provides a set of dialog boxes that walk
you through the steps required for removing a local initiator from a local target
mapping.
You can start this wizard at any time by selecting Unmap Local Initiator/Target
Wizard from the Wizards Menu or from the Action Menu.
When the UnMap Local Initiator/Target Wizard launches, the Select an Initiator
dialog box displays a list of locally connected initiators (FC or iSCSI), as shown in
Figure 4-24.