User`s guide

3 – Managing the Router
FC Ports
SN0054660-00 A 3-11
A
FC Ports
When you select an FC port in the system tree, the system displays the FC Port
Information tabbed page (see Figure 3-8).
Figure 3-8 FC Port Information Tab
FC Port Information Tab
The FC Port Information tab provides the following parameters:
 Node Name – Displays the world-wide node name (WWNN) assigned to the
FC port.
 Port Name – Displays the world-wide port name (WWPN) assigned to the
FC port.
 Port Status – Lets you change the port status: Enabled (online) or
Disabled (offline). After changing the status, click Save. If you choose to
disable the port, a warning message appears, letting you know it will
disconnect one or more ports. Click Yes to disconnect the port, or No to
cancel the changes.
 Link Status – Displays the link status, either Link Up or Link Down.
 Port ID – Displays the ID assigned by the FC fabric or AL_PA if the FC port
is connected to a private loop.