User`s guide

3 – Managing the Router
iSR6142 Router
SN0054660-00 A 3-5
A
 IPv6 Default Router – Use this address to set the default router for the
IPv6. The system can also set the IPv6 default router dynamically
depending on your network configuration.
 IPv6 Local Link – This field contains the IPv6 link local address of the
port. It is not editable.
 Set IP Address – After making any IP address changes, click this button to
save your changes.
NTP Server Information
Figure 3-3 NTP Server Information Vertical Tab
The NTP Server Information tab provides the following parameters:
 NTP Server Radio Buttons – Use these buttons to disable or enable using
NTP servers to set the router’s date and time.
 NTP Server 1 – Displays the IP address of the first NTP server to be queried
by the router when setting its time and date.
NOTE:
IPv6 support is available only with hardware version 6 and software version
2.4.0.0 and greater.