User`s guide

2 – Using the Graphical User Interface (GUI)
Menu Bar
SN0054660-00 A 2-5
A
Figure 2-6 Broadcast Settings Menu
 Enable Broadcast – Enables broadcast messages sent to locate routers in
the IP subnet.
 Enable Auto Connect – Enables the SANsurfer Router Manager to
automatically connect with routers discovered by the broadcast.
 Broadcast Interval – Lets you enter the time interval at which the
SANsurfer Router Manager sends broadcast messages to locate routers
within the same IP subnet as the workstation.
Wizards Menu
Figure 2-7 shows the Wizards menu. The following paragraphs describe it.
Figure 2-7 Wizards Menu
 Configuration Wizard – Launches the iSCSI Port Configuration Wizard,
which allows you to configure the IP address and other parameters for an
iSCSI port (see page 4-2).
 Add Initiator Wizard – Launches the iSCSI Add Initiator Wizard, which
allows you to configure the IP address and other parameters for an iSCSI
initiator (see page 4-7).
 FW Update Wizard – Launches the Firmware Update Wizard, which allows
you to update the iSR6142 router’s firmware image. You can select the
firmware image from a menu that allows browsing (see page 4-9).