User`s guide

4 – Using the Wizards
FCIP Route Add Wizard
SN0054660-00 A 4-49
A
 VLAN ID – Provides a text field you can use to enter the VLAN ID. This
option is available only when VLAN is enabled. The VLAN ID must be
the same on both routers participating in the FCIP route (that is, local
and remote routers must be using same VLAN ID) and the Ethernet
switches.
 VLAN Priority – Provides a drop-down box that contains eight options
for the VLAN priority: any number between 0–7. This dialog box is
available only when VLAN is enabled.
8. After setting the TCP/IP parameters, click Next to continue or click Cancel
to quit the wizard.
The FCIP Options dialog box requests entry of FCIP parameters, as shown
in Figure 4-58.
Figure 4-58 FCIP Route Add Wizard—FCIP Options Dialog Box
9. Configure any of the following parameters:
 FCIP Timestamp – Provides a drop-down box you can use to enable
or disable FCIP timestamps. The default is enabled.
 Error Detect Timeout – Provides a drop-down box you can use to
select one of five options for the error detect timeout: any number
between 1 to 5 seconds. The default is one second.
 Resource Allocate Timeout – Provides a drop-down box you can use
to select one of five options for the resource allocate timeout: any
number between 1 to 5 seconds. The default is one second.