User guide

1–Operations and Administration
Configuration and Monitoring Features
D000101-000 E 1-39
An event has occurred that has caused the slot mode to be set to disabled.
The user should resolve the error and reset the mode to the proper value for
the affected slot.
Subnet Manager Configuration File
The Subnet Manager Configuration File window allows the user to upload and
download new QLogic Fabric Manager embedded subnet manager files, as well
as start and restart all applicable master and standby subnet managers using the
new file.
1. From the Chassis menu, select Config File Admin.
The Subnet Manager Config File button is displayed (Figure 1-56).
Figure 1-56 Subnet Manager Configuration File
2. Click Subnet Manager Config File.
The Subnet Manager Configuration window is displayed (Figure 1-57).
NOTE:
The default settings for this window are as shown above. The user
should not change the defaults unless instructed by Technical Support.