User guide

1–Operations and Administration
Configuration and Monitoring Features
D000101-000 E 1-31
This field determines whether or not the entry is saved for each reboot of the
switch.
 Nonvolatile means that the value is saved, and remains with each
subsequent reboot.
 Volatile or Other indicates it will not be saved.
 Status
Indicates the current status of the row. The row may be in one of three
states:
 Active
 Not in service
 Not Ready
Filter Status
The SNMP Filter Status window allows the user to view parameters for rfc2273
(SNMP-NOTIFICATION-MIB).
To view SNMP filter status:
1. From the menu, select SNMP
The Filter Status button is displayed (Figure 1-43).
Figure 1-43 Filter Status Button
2. Click Filter Status.
The SNMP Filter Status window is displayed (Figure 1-44).
NOTE:
A status of not in service indicates that the current row will not be
used in the event a trap is generated by the system. Toggling a trap to
not in service, which temporarily suspends trap forwarding, may be
useful to keep values intact.